KEYPAD CONTROLS
34
25
16
8
11
7
9
10
12
1 - 6 The six LEDs indicate the volume level of the BK10. The LEDs also also display the source selected when the source is changed and can also show the status of some other functions. For full instructions on volume adjustment, source selection, sound adjustment and local source selection modes, refer to the ‘Operating instructions’ section of this guide.
7Standby/On
Press to switch the keypad between On and Standby mode. By pressing and holding the Standby button for about 2 seconds, all BK10s connected to the AH10 hub will be turned off. If the BK10 is connected to a Cambridge Audio Incognito Ready Amplifier rather than an AH10 hub, the amplifier will be turned off.
8Volume up
Press to increase the volume or other sound adjustment.
9Source select (right)
Use this key to select the current active source.
