Cambridge SoundWorks AVS550 user manual Select TV Scan Mode, Select TV Output type

Select TV Scan Mode: Select TV Output type:

Skip this step if your TV does not support Progressive Scan video. The output mode of the AVS550 must match the input mode of your TV set.

A.Press SETUP to enter the setup menu.

B.Select VIDEO and press ENTER.

C.Select SCAN and choose ENTER.

D.Choose PROGRESSIVE only if you have a Progressive scan compatible TV. Otherwise choose

INTERLACED.

E.Press ENTER to confirm your selection, then press < to return to the previous menu level.

F.Change your TV input to a progressive scan input. IMPORTANT NOTE: If you inadvertently select Progressive Scan with an incompatible TV, the pic- ture may be lost and you will be unable to navigate the menus. If this occurs:

1. Press Eject to open the drawer in DVD mode.

2. Press the SLIDE key to switch between progres- sive and Interlaced until the picture reappears.

3. Close the drawer.

You may skip this step if you have connected the AVS550 to your TV using an S-Video cable. It is only necessary if your TV has a CVBS video input exclusively.

A.Select TV OUT.

B.Choose YCrCb + CVBS.

C.Press ENTER to confirm your selection, then press < to return to the previous menu level.

21