Cambridge SoundWorks PCWorks Speaker System Specifications, Subwoofer amplifier With a, PCWorks’

Important

Playback Levels

PCWorks is intended for individual or small group listening and will achieve surprisingly high output levels. However, playing the system continuously at overly loud, distorted levels on heavy bass program material may cause its internal fuse to blow.

The fuse can be replaced only by a qualified representative. To avoid this inconvenience and a possible non-warranty repair charge, reduce the playback volume when the system shows obvious signs of stress, i.e. it sounds “raspy,” “fuzzy,” and/or “muddy.”

Specifications

PCWorks’

Three-channel

Amplifier Specifications

Satellite amplifier: One channel driven into a 4 ohm load at less than 1% total harmonic distortion, at 1kHz: 3.5 watts RMS.

Subwoofer amplifier: With a

4 ohm load at less than 1% total harmonic distortion, at 100Hz: 10 watts RMS.

These specifications apply to a PCWorks operating from a 120 VAC line and a 12V DC power adapter.

Note: in advertising, the term “peak power”—double an amplifier’s music power—is often used.

16