Cambridge SoundWorks PCWorks Speaker System Satellite Cube Connections, Right Satellite Cube

Satellite Cube Connections

Connect the speaker wire from one satellite to the right speaker output (+ R –) of the subwoofer. Connect the conductor with the red band to the red (+) terminal. Connect the other conductor to the black (–) terminal.

Connect the speaker wire from the other satellite to the left speaker output (– L +) of the subwoofer.

Connecting the two cubes identi- cally assures that they operate “in phase” (their cones move in and

out together). “Out of phase” con- nections can muddy the stereo effect. Solo voices, which should appear to come from a point be- tween the two cubes, will sound “split” between them.

Notes

The satellite amplifiers inside the PC Works subwoofer are specifically designed to drive the PC Works cube satellites. Do not connect these left and right amplifier outputs to any other speakers or any kind of signal processing device.

You can splice more standard speaker wire or regular

18-gauge lamp cord onto the 12-ft. speaker wires supplied using wire nuts; visit your store or call Cambridge Sound- Works at 1-800-FOR-HIFI to purchase additional wire.

Use of the Bass Level control is described in each of the applications sections that follow; for now simply set it at the midway (12 O’Clock) position.

Right

Satellite

Cube

To connect speaker wires to subwoofer, push on the spring-loaded tab above each connector, insert bared end of wire, then release tab to lock wire in place.

Subwoofer Control Panel

BASS

LEVEL

CAMBRIDGE SOUNDWORKS

NEWTON, MASSACHUSETTS

AUDIO

INPUT

	SPEAKERS
R	L
12V DC IN
POWER	Red band
ON/OFF

Red band

Left

Satellite

Cube

Speaker wire

3