Campbell Hausfeld AT122601 (Continued), Assembly, General Safety Information

Operating .Instructions

General Safety Information						connector .can .be .used .to .attach .the .
(Continued)						hose .to .the .gun..
				Disconnect the sandblaster from the air
(like a wooden pallet) a dry mat, or dry
				supply before changing accessories or
carpet.
				attempting to install, service, relocate
General Safety				or perform any maintenance.
				7. . Check .hoses .and .air .lines .for .weak .
• . Read .all .manuals .included .
				or .worn .condition .before .each .use. .
with .this .product .carefully.		.
			MANUAL	Make .sure .all .connections .are .secure .					Attach .air .
Be .thoroughly .familiar .								Material .
				before .use..					hose
with .the .controls .and .the .
					Do not			hose
proper .use .of .the .equipment. .Follow .							Do .not .cover .outer .
					point
all .instructions..							tube .with .hose .for .dry .
				the sandblast gun at anyone or objects
							blasting
• . Only .persons .well .acquainted .with .				other than the intended work object.
								Pick-up .tube
these .rules .of .safe .operation .should .				8. . Do .not .depress .the .trigger .when .
be .allowed .to .use .the .unit..				connecting .the .air .supply .hose..
	Do not				Do not
	misuse				work	Figure 4 - Model AT122601
this product. Excessive exposure to
				around oily rags or flammable liquids.
vibration, work in awkward positions,				Sand striking metal can cause a spark		MODEL AT125102
and repetitive work motions can cause				and create a fire or explosion.
injury to hands and arms. Stop using						1. . Attach .the .material .hose .to .the .hose .
any tool if discomfort, numbness,
						connector. .Attach .the .opposite .end .
tingling or pain occur, and consult a
physician.						of .the .material .hose .to .the .gun .(See .
1. . Read .this .instruction .manual .before .						Figure .5). .Never .use .hose .clamps .to .
						secure .the .hose..
connecting .this .device .to .the .
compressor..
2. . Safety .glasses .or .face .shield, .gloves .
and .a .NIOSH .approved .respirator .
must .be .worn .during .operation. .
Always .work .in .a .well .ventilated .				Figure 2
area..
					Do not
					spray
				acids or caustics.
						Figure 5 - Model AT125102
						NOTE: .Do .not .cover .the .hole .in .the .
Figure 1						hose .connector .for .dry .blasting. . .For .
						spraying .liquids, .slip .the .material .hose .
3. . During .operation, .do .not .expose .the .						fully .on .to .the .hose .connector .covering .
						the .hole..
hands .or .skin .directly .in .the .line .of .
						2. . Attach .the .air .compressor .hose .
the .blast .nozzle..				Figure 3
						to .the .air .inlet .(1/4 .inch .NPT(F)) .
4. . After .installation, .inspect .to .make .
						at .the .bottom .of .the .gun .handle. .
				Assembly
sure .all .components .seal .properly..
						An .optional .quick .coupler .and .
5. . Keep .children .away .at .all .times. .All .				Model AT122601		connector .can .be .used .to .attach .the .
visitors .must .be .kept .a .safe .distance .						hose .to .the .gun..
				1. . Attach .material .hose .to .the .pick-up .
and .wear .safety .glasses, .gloves .and .a .						MODEL AT121002
respirator..				tube. .Place .pick-up .tube .in .bag .of .
				medium. .(See .FIgure .4)..		1. . Attach .the .hose .connector .to .the .
6. . Do .not .exceed .the .maximum .
				2. . Attach .the .air .compressor .hose .		hopper .using .the .supplied .conduit .
operating .pressure .of .the .
				to .the .air .inlet .(1/4 .inch .NPT(F)) .		nut..
sandblasting .equipment .(125 .psi)..
				at .the .bottom .of .the .gun .handle. .		2. . Attach .the .material .hose .to .the .hose .
				An .optional .quick .coupler .and .		connector. .Attach .the .opposite .end .
						of .the .material .hose .to .the .gun .(See .

www.chpower.com