Campbell Hausfeld IFK003 manual Pressure Feed mode

IFK003

• NOTICE •

This spray gun is shipped in Siphon Feed mode, used for a finer finish with light materials. To use the gun with high-viscosity materials such as latex paint, use the

Pressure Feed mode.

P	S
S
P

To change from Siphon Feed to Pressure Feed mode, turn the knob shown above from ‘S’ to ‘P’ until finger tight.

Thoroughly mix the material in accordance with the manufacturer’s instructions. If necessary, thin per paint manufacturer’s instructions.

© 2003 Campbell Hausfeld/Scott Fetzer IN170233AV 7/03

For parts, product & service information

visit www.chpower.com