See Warranty on page 7 for important information about commercial use of this product.
Operating Instructions | Model IFN35650 |
|
|
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury, death and/or property damage! Retain instructions for future reference.
Angle Finish Nailer
Table Of Contents
General Safety . . . . . . . . . . . . . . . 1 - 3
Specifications . . . . . . . . . . . . . . . . . . 2
Operational Modes . . . . . . . . . . . . . 4
Operating The Nailer . . . . . . . . . 3 - 5
Troubleshooting . . . . . . . . . . . . . . . 6
Warranty . . . . . . . . . . . . . . . . . . . . . 7
DescriptionThis manual contains safety, operational and maintenance information.
Read this manual and understand all safety warnings and instructions before operating the nailer. Contact your Campbell Hausfeld representative if you have any questions.
MANUAL
Model IFN35650
This nailer is designed for decorative trim, molding, window casings, furniture trim and picture frame assembly. Features include: convenient rear loading magazine which holds up to 100 nails,
CALIFORNIA PROPOSITION 65
You can create dust when 
you cut, sand, drill or grind materials such as wood, 
paint, metal, concrete, cement, or other masonry. This dust often contains chemicals known to cause cancer, birth defects, or other reproductive harm. Wear protective gear.
Excessive exposure to vibration, working in awkward positions and repetitive work motions can cause injury to hands and arms. Stop using any tool if discomfort, numbness, tingling or pain occur and consult a physician.
OPERATOR’S RESPONSIBILITY:
Before operating the nailer, read and understand all safety warnings and labels. Follow the operating instructions outlined in this manual.
EMPLOYER’S RESPONSIBILITY:
Distribute this instruction manual to all users before allowing use of the nailer. Ensure all operators read, understand and follow all safety warnings, labels and instructions outlined in this manual.
!DANGER Danger indicates an imminently
hazardous situation which, if not avoided, WILL result in death or serious injury.
• Do not use any type |
|
|
|
|
|
|
|
|
| ||
of flammable gases |
|
|
|
|
|
|
|
|
| ||
|
|
|
| ||
or oxygen as a power |
|
|
|
|
|
|
|
|
| ||
source for the nailer. |
| O |
|
|
|
Use filtered, |
|
| CO2 | ||
|
|
| |||
lubricated, regulated |
|
|
|
|
|
compressed air only. |
|
|
|
|
|
|
|
|
|
| |
Use of a compressed gas instead of compressed air may cause the nailer to explode which will cause death or serious personal injury.
• Do not exceed
maximum operating pressure of the nailer (120 psi). The nailer
will not function
properly. Do not use
a compressed air 
source capable of more than 200 PSI.
Locate model and date code on tool and record below:
Model No. ______________________
Date Code ______________________
Retain these numbers for
future reference.
The nailer could explode which will cause death or serious personal injury.
• Never use gasoline
or other flammable liquids to clean the
nailer. Never use the nailer in the presence of flammable liquids
or gases. Vapors could ignite by a spark and cause an explosion which will result in death or serious personal injury.
• Always remain in a firmly balanced position when using or handling the nailer.
•Do not modify or disable the Work Contact Element
(WCE). Do not tie
or tape the WCE or trigger in a depressed
position. Death or serious personal injury could result.
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
Campbell Hausfeld Nailers meet or exceed Industries’ Standards as set forth by the American National | IN725300AV 2/08 | |
Standard Institute/International Staple, Nail and Tool Association in ANSI/ISANTA |
| |
© 2008 Campbell Hausfeld/Scott Fetzer | For parts, product & service information |
|
visit www.chpower.com