Operating Instructions | Model IFN35650 |
|
|
•Do not touch the trigger unless driving nails.
Never attach air line to nailer or carry nailer while touching the trigger. The
tool could eject a fastener which will result in death or serious personal injury.
Warning indicates
! WARNING a potentially hazardous situation which, if not avoided, COULD result in death or serious injury.
•Always disconnect
nailer from air line before
clearing jams, adjusting or
servicing the
nailer, relocating the nailer, or when the nailer is not in use. Always reconnect the air line BEFORE loading any fasteners. The nailer could eject a fastener causing death or serious personal injury.
•Protect your eyes and
ears. Wear Z87 safety
glasses, with side shields. Wear hearing protection. Employers
and users are
responsible for ensuring the user or anyone near the nailer wears this safety protection. Serious eye injury or permanent hearing loss could result.
•Do not use a check valve or
any other fitting which
allows air to remain in the nailer. Death
or serious personal injury could occur.
•Never place hands or any other body parts in the nail discharge area of the nailer. The nailer might eject
a fastener and could result in death or serious personal injury.
•Never carry the nailer by the air hose or pull the
hose to move the nailer or a
compressor. Keep hoses away from
heat, oil and
sharp edges. Replace any hose that is damaged, weak or worn. Personal injury or tool damage could occur.
•Always assume the nailer contains nails. Never use the nailer as a toy. Do not engage in horseplay. Always keep others at a safe distance from the work area in case of accidental discharge of nails. Never point the nailer at anyone. Accidental triggering of the nailer could result in death or serious personal injury.
•Do not drive a
nail on top of other nails. The nail could glance and cause death or a serious puncture wound.
•Do not operate
or allow
anyone else to operate the nailer if any warnings or warning labels
are not legible. Warnings or warning labels are located on the nailer magazine and body.
•Never leave the nailer unattended or connected to an air compressor when not in use. Serious personal injury can occur if someone picks up and uses the nailer without knowing the correct way to operate the nailer.
•Do not drop or throw the tool. Dropping or throwing the tool can result in damage that will make the tool unusable or unsafe. If the tool has been dropped or thrown, examine the tool closely for bent, cracked or broken parts and air leaks. STOP and repair before using or serious injury could occur.
Caution indicates a
! CAUTION potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury.
• Do not modify or alter the nailer or any nailer parts. Do not use the nailer if any shields or guards are removed or altered. Do not use the nailer as a hammer. Personal injury or tool
damage may occur.
• Avoid long extended periods of work with the nailer. Stop using the nailer if you feel pain in hands or arms.
Nailer Components And Specifications
Adjustable Direction |
|
Exhaust Deflector | Nail Loading Area |
|
•REQUIRES: 1.8 SCFM with 10 nails per minute @ 90 psi
•AIR INLET: 1/4 inch NPT
•NAIL SIZE RANGE:
•MAGAZINE CAPACITY:
100 Nails per load, 15 gauge
•WEIGHT: 5 lbs., 11 oz.
•LENGTH:
•HEIGHT:
•MAXIMUM PRESSURE: 120 psi
•PRESSURE RANGE: 70 - 120 psi
Trigger
Specification
Decal
Adjustable
Depth
Control
Quick Clear Latch
Warning Decal
Trilingual
Aluminum Magazine
Hard Anodized
Nail Pusher Assembly
Rubber
Nail Discharge Area
www.chpower.com
2