WL Series

Operation (Continued)

TANK PRESSURE GAUGE

Gauge shows pressure in tank indicating compressor is building pressure properly.

Maintenance

! WARNING

Disconnect power source then release all pressure from the system before

attempting to install, service, relocate or perform any maintenance.

The compressor should be checked often for any visible problems and the following maintenance procedures should be performed each time the compressor is used.

1.Pull ring on safety valve and allow it to snap back to normal position.

! WARNING

Safety valve must

be replaced if it

 

cannot be actuated or it leaks air after ring is released.

2.With compressor shut off and pressure released: Drain moisture from tank by opening drain cock underneath tank.

Notes

Figure 8

3.Turn power OFF and clean dust and dirt from motor, tank, air lines and pump cooling fins.

IMPORTANT: Unit should be located as far from spraying area as hose will allow to prevent over-spray from clogging filter.

AIR FILTER

Check air filter to be sure it is clean. To service a filter, remove the filter housing cover. Remove filter and clean in hot, soapy water (Paper filters cannot be washed). Rinse and let dry. Replace air filters that cannot be cleaned. Place filter back in the housing base. Replace cover.

LUBRICATION

This is an oilless type compressor requiring no lubrication.

THERMAL OVERLOAD PROTECTOR

This compressor is ! CAUTION equipped with an

automatic reset thermal overload protector which will shut off motor if it becomes overheated.

If thermal overload protector shuts motor OFF frequently, look for the following causes.

1.Low voltage.

2.Clogged air filter.

3.Lack of proper ventilation.

If the thermal

!CAUTION overload protector is actuated, the motor must be allowed to cool down before start-up is possible. The motor will automatically restart without warning if left plugged into electrical outlet and unit is turned on.

TORQUE REQUIREMENTS

Connecting rod bolt . . . . . . . . 20 in. Ibs.

Compressor hd. bolts. . . 100-110 in. Ibs.

Motor bolts . . . . . . . . . . . . . . . 35 in. Ibs.

Mounting bolts . . . . . . . . . . . . 90 in. Ibs.

STORAGE

1.When not in use, hose and compressor should be stored in a cool dry place.

2.Tank should be drained of moisture.

3.Hose should be disconnected and hung open, ends down, to allow any moisture to drain.

www.chpower.com

5

Page 4 Page 6
Page 5
Image 5
Campbell Hausfeld IN203203AV 11/00 operating instructions Maintenance
Page 4 Page 6

IN203203AV 11/00 specifications

The Campbell Hausfeld IN203203AV 11/00 is a powerful and versatile air compressor designed to meet the demands of both DIY enthusiasts and professional tradespeople alike. Known for its robust construction and reliable performance, this model stands out in a crowded market, offering an array of features tailored to diverse applications.

One of the key characteristics of the IN203203AV is its oil-free pump design, which significantly reduces maintenance requirements. This feature is particularly advantageous for users seeking hassle-free operation without sacrificing durability or performance. The oil-free technology ensures that users can enjoy cleaner air output, making it an excellent choice for tasks requiring precision, such as painting or inflating.

With a powerful motor that delivers a substantial amount of output, the IN203203AV can power various pneumatic tools, including nailers, staplers, and impact wrenches. It boasts a high flow rate, allowing for quicker recovery times between tool usage, which enhances productivity in demanding work environments.

Portability is another standout feature. The compact design and lightweight construction make it easy to transport, whether from the garage to the job site or around the workshop. The integrated handle and rubber wheels facilitate effortless mobility, ensuring that users can move it without strain.

Safety and convenience are also addressed with features like the built-in pressure regulator, which allows for precise air pressure adjustments based on specific tool requirements. This not only protects tools from damage but also enhances their longevity. Additionally, the IN203203AV is equipped with multiple outlet ports, making it convenient to connect various tools simultaneously.

The quiet operation of this compressor is another significant selling point. Operating at lower noise levels compared to many counterparts, it allows for prolonged use without disturbing the environment, making it ideal for indoor tasks or residential areas.

In conclusion, the Campbell Hausfeld IN203203AV 11/00 air compressor is a reliable and efficient choice for those looking for a machine that combines portability, ease of use, and versatile functionality. Its thoughtful design elements, coupled with the innovative oil-free pump technology, underscore its commitment to quality and user satisfaction in any setting. Whether used for home improvement projects or professional applications, this compressor is engineered to meet a broad range of air compression needs.
Top Page Image Contents