Campbell Hausfeld CHN10210, IN276802AV (Continued), Tool Components and Specifications, Important Safety Instructions

Operating Instructions

Important Safety Instructions			c.	Keep bystanders, children, and	e.	Use safety equipment. A dust mask,
(Continued)				visitors away while operating the		non-skid safety shoes and a hard
General				tool. Distractions are able to result in		hat must be used for the applicable
				the loss of control of the tool.		conditions.
a.	To reduce the risks of
					f.	Always wear eye
	electric shock, fire, and		Personal Safety
	injury to persons, read all		a.	Stay alert. Watch what you are		protection.
	the instructions before				g.	Always wear hearing
				doing and use common sense
	using the tool.					protection when using
				when operating the tool. Do not
b. Be thoroughly familiar with the				use the tool while tired or under		the tool. Prolonged
	controls and the proper use of the			the influence of drugs, alcohol,		exposure to high intensity
	equipment. Follow all instructions.			or medication. A moment of		noise is able to cause
	Contact your Campbell Hausfeld			inattention while operating the		hearing loss.
	representative if you have any			tool increases the risk of injury to	h.	Do not attach the hose or tool to
	questions.			persons.		your body. Attach the hose to the
c.	Only persons well acquainted with		b.	Dress properly. Do not wear loose		structure to reduce the risk of loss of
	these rules of safe operation should			clothing or jewelry. Contain long		balance if the hose shifts.
	be allowed to use the unit.			hair. Keep hair, clothing, and	i.	Always assume that the tool
		Read and		gloves away from moving parts.		contains fasteners. Do not point
		understand tool		Loose clothes, jewelry, or long		the tool toward yourself or anyone
labels and manual. Failure to follow				hair increases the risk of injury to		whether it contains fasteners or not.
warnings, dangers, and cautions could
				persons as a result of being caught	j.			Do not nail on
result in DEATH or SERIOUS INJURY.
				in moving parts.
Work Area								top of another
			c.	Avoid unintentional starting.		nail. This is able to cause the nail to
						be deflected and hit someone, or
a.	Keep the work area clean and well			Be sure the switch is off before
						cause the tool to react and result in a
	lighted. Cluttered benches and dark			connecting to the air supply. Do not
						risk of injury to persons.
	areas increase the risks of electric			carry the tool with your finger on	k.			Remove finger
	shock, fire, and injury to persons.			the switch or connect the tool to the
								from the trigger
				air supply with the switch on.
b. Do not operate the tool						when not driving fasteners. Never
	in explosive atmospheres,		d.	Do not overreach. Keep proper		carry the tool with finger on trigger,
	such as in the presence			footing and balance at all times.		the tool is able to fire a fastener.
	of flammable liquids,			Proper footing and balance enables			Always remain in a
	gases, or dust. The tool is			better control of the tool in			firmly balanced
					position when using or handling the
	able to create sparks resulting in the			unexpected situations.
					tool.
	ignition of the dust or fumes.
							Avoid long extended
							periods of work
					with the tool. Stop using the tool if you
					feel pain in hands or arms.

Tool Components and Specifications

•Requires: 0.4 SCFM with

10 nails per minute @ 90 psi

•Air inlet: 1/4 inch NPT

•nail SIZE RANGE: 5/8 inch to 2 inch

•MAGAZINE CAPACITY:

100 Staples per load, 18 gauge

•WEIGHT: 3 lbs. 6 oz.

•LENGTH: 11-1/4 inches

•HEIGHT: 10-1/2 inches

•MAXIMUM PRESSURE: 100 psi

•PRESSURE RANGE: 60 psi – 100 psi

Work Contact	Quick Clear Nose	Cap Exhaust
Element (WCE)

Fastener	Area
Discharge
Area
	Loading	Trigger
	Fastener	Air
		Inlet
		Magazine
		Latch

www.chpower.com 2