See Warranty on page 10 for important information about commercial use of this product.
Operating Instructions | NB006750 |
|
|
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
Finishing
Nailer
Table of Contents
Description . . . . . . . . . . . 1
Unpacking . . . . . . . . . . . 1
Safety Guidelines . . . . . . . . .1
Important Safety Instructions . . . .2
Tool Components and Specifications .2
Operating the Nailer . . . . . . . 4
Fasteners . . . . . . . . . . . . 7
Troubleshooting Chart . . . . . . . . . . . . .8
Warranty . . . . . . . . . . . .10
Description
This nailer is designed for decorative trim, molding, window casings, furniture trim and picture frame assembly. Features include: convenient top loading magazine which holds up to 100 nails,
Unpacking
After unpacking the unit, inspect carefully for any damage that may have occurred during transit. Make sure to tighten fittings, bolts, etc., before putting unit into service.
Read & Follow All Instructions
Save These Instructions
Do Not Discard
Figure 1 - Model NB006750
Safety Guidelines
This manual contains information that is very important to know and understand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols.
Danger indicates an imminently
hazardous situation which, if not avoided, WILL result in death or serious injury.
Warning indicates a potentially
hazardous situation which, if not avoided, COULD result in death or serious injury.
Caution indicates a potentially
hazardous situation which, if not
avoided, MAY result in minor or moderate injury.
Notice indicates important
information, that if not followed, may cause damage to equipment.
NOTE: Information that requires special attention.
Locate model and date code on tool and record below:
Model No. ______________________
Date Code ______________________
Retain these numbers for future reference.
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
Campbell Hausfeld Nailers meet or exceed Industries’ Standards as set forth by the American National Standard Institute/International Staple, Nail and Tool Association in ANSI/ISANTA
For parts, product & service information | IN720501AV 11/09 |
visit www.chpower.com |
|
© 2009 Campbell Hausfeld/Scott Fetzer