Campbell Hausfeld CHN10500, IN726401AV manual 2

Operating Instructions

Important Safety Instructions			able to create sparks resulting in the			better control of the tool in
(Continued)			ignition of the dust or fumes..			unexpected situations..
General		c..	Keep bystanders, children, and		e..	Use safety equipment. A dust mask,
a..	To reduce the risks of		visitors away while operating the			non-skid safety shoes and a hard
			tool. Distractions are able to result in			hat must be used for the applicable
	electric shock, fire, and
			the loss of control of the tool..			conditions..
	injury to persons, read all
	the instructions before	Personal Safety			f..	Always wear eye
	using the tool.	a..	Stay alert. Watch what you are			protection.
b.	Be thoroughly familiar with the				g.. Always wear hearing
			doing and use common sense
	controls and the proper use of the					protection when using
			when operating the tool. Do not
	equipment.. Follow all instructions..					the tool. Prolonged
			use the tool while tired or under
	Contact your Campbell Hausfeld					exposure to high intensity
			the influence of drugs, alcohol,
	representative if you have any					noise is able to cause
			or medication. A moment of
	questions..					hearing loss..
			inattention while operating the
c.	Only persons well acquainted with		tool increases the risk of injury to		h.. Do not attach the hose or tool to
	these rules of safe operation should		persons..			your body. Attach the hose to the
	be allowed to use the unit..	b..	Dress properly. Do not wear loose			structure to reduce the risk of loss of
	Read and					balance if the hose shifts..
			clothing or jewelry. Contain long
	understand tool
			hair. Keep hair, clothing, and		i..	Always assume that the tool
labels and manual. Failure to follow
			gloves away from moving parts.			contains fasteners. Do not point
warnings, dangers, and cautions could
			Loose clothes, jewelry, or long			the tool toward yourself or anyone
result in DEATH or SERIOUS INJURY.
Work Area			hair increases the risk of injury to			whether it contains fasteners or not..
			persons as a result of being caught		j.		Do
a..	Keep the work area clean and well		in moving parts..
							not nail on
	lighted. Cluttered benches and dark	c..	Avoid unintentional starting.			top of another nail. This is able to
	areas increase the risks of electric					cause the nail to be deflected and
			Be sure the switch is off before
	shock, fire, and injury to persons..					hit someone, or cause the tool to
			connecting to the air supply. Do not
						react and result in a risk of injury to
b.. Do not operate the tool
			carry the tool with your finger on			persons.
	in explosive atmospheres,		the switch or connect the tool to the		k..		Remove finger
	such as in the presence		air supply with the switch on..
							from the trigger
	of flammable liquids,	d..	Do not overreach. Keep proper			when not driving fasteners. Never
	gases, or dust. The tool is					carry the tool with finger on trigger,
			footing and balance at all times.
						the tool is able to fire a fastener.
			Proper footing and balance enables
Tool Components and Specifications
• Requires: 0..15 SCFM with 10			Adjustable Exhaust
	fasteners per minute @ 90 psi	Head Cap			Trigger Lock
• Air inlet: 1/4 inch NPT
							Latch
• PIN SIZE RANGE: 3/8 inch to 7/8 inch
							Button
• MAGAZINE CAPACITY:							(other
	110 headless pins, 23 g						side)
• WEIGHT: 1 lb.. 13 oz..					Trigger		Magazine
• LENGTH: 8..25 inches
• HEIGHT: 6..8 inches
• MAXIMUM PRESSURE: 100 psi
• PRESSURE RANGE: 60 psi – 100 psi
						Nail Loading Area
			Nail Discharge	Automatic Nail
				Length Plate
			Area
www.chpower.com

2