Pressure Washers

Pre-Operation (Continued)

Figure 5 – Attach suction tube to barb fitting

4.Brass Swivel Adaptor (See Figure 4). If it’s not already attached to the pump inlet, assemble the brass swivel adapter and attach it to the pump inlet (See Figure 6 and Figure 7). Be sure to connect the correct side of the brass swivel adapter to the pump.

Connect this end to garden hose Washer

Washer

 

with filter

Connect this end to pump

screen

Figure 6 - Brass swivel adapter

Brass swivel adapter

Pump inlet

Figure 7 - Connect the brass swivel to the pump

5.Secure garden hose (not included) to the inlet connection on pump.

6.Connect the high pressure hose to the pump outlet (See Figures 4 and 8).

7.Attach the lance with nozzle to the gun (see Figure 9).

Figure 8 – Connect high pressure hose to pump

Figure 9 – Attach lance to gun

TRIGGER SAFETY LATCH

In the engaged position, the trigger safety latch prevents the gun from being triggered accidentally. Push the latch fully down to engage it (See Figure 10 and 11).

Engaged

Figure 10 - Trigger locked

Disengaged

Figure 11 - Trigger unlocked

Always engage the trigger safety latch when the unit is not in use.

5

www.chpower.com