See Warranty on page 10 for important information about commercial use of this product.

Operating Instructions

SN338K00

 

 

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.

1-1/4 inch Stapler

Table of Contents

Description . . . . . . . . . . . . . . . . . . . . . 1

Unpacking . . . . . . . . . . . . . . . . . . . . . . 1

Safety Guidelines . . . . . . . . . . . . . . . . 1

Important Safety Instructions . . . . . . 1

Tool Components and

Specifications. . . . . . . . . . . . . . . . . . . . 2

Operating Instructions . . . . . . . . . . . . 4

Lubrication . . . . . . . . . . . . . . . . . . . . 4

Recommended Hookup. . . . . . . . . . 5

Operational Mode . . . . . . . . . . . . . . 5

Work Contact Element (WCE) . . . . . 5

Loading/Unloading The Tool. . . . . . 6

Adjusting the Fastener

Penetration. . . . . . . . . . . . . . . . . . . . 6

Adjusting the Direction

of the Exhaust . . . . . . . . . . . . . . . . . 6

User-Maintenance Instructions . . . . . 6

Clearing A Jam From The Tool . . . . 6

Technical Service . . . . . . . . . . . . . . . 6

Fastener And Replacement Parts . . 6

Tool Repair . . . . . . . . . . . . . . . . . . . . 6

Assembly Procedure For Seals. . . . . 6

Fasteners . . . . . . . . . . . . . . . . . . . . . . . 7

Troubleshooting Chart . . . . . . . . . . . . 8

Warranty . . . . . . . . . . . . . . . . . . . . . . 10

Description

This tool is designed for picture frame assembly, cabinetry, casebacks, and crafts. Features include: convenient top loading magazine which holds up to 100 staples, adjustable depth control, adjustable exhaust.

Unpacking

After unpacking the unit, inspect carefully for any damage that may have occurred during transit. Make sure to tighten fittings, bolts, etc., before putting unit into service.

Safety Guidelines

This manual contains information that is very important to know and understand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols.

Danger indicates an imminently

hazardous situation which, if not avoided, WILL result in death or serious injury.

Warning indicates

apotentially

hazardous situation which, if not avoided, COULD result in death or serious injury.

Caution indicates

apotentially

hazardous situation which, if not avoided, MAY result in minor or moderate injury.

Notice indicates important

information, that if not followed, may cause damage to equipment.

NOTE: Information that requires special attention.

Important Safety Instructions

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS

This manual contains safety, operational and maintenance information. Contact your Campbell Hausfeld representative if you have any questions.

When using tools, basic precautions should always be followed, including

the following:

Model SN338K00

Locate model and date code on tool magazine and / or body, and record below:

Model No.: _____________________

Date Code: _____________________

Retain these numbers for

future reference.

CALIFORNIA PROPOSITION 65

This product or

its power cord may

contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Wash hands after handling.

You can create dust when you cut, sand, drill or grind materials such as wood,

paint, metal, concrete, cement, or other masonry. This dust often contains chemicals known to cause cancer, birth defects, or other reproductive harm. Wear protective gear.

REMINDER: Keep your dated proof of purchase for warranty purposes!

Attach it to this manual or file it for safekeeping.

Campbell Hausfeld Nailers meet or exceed Industries’ Standards as set forth by the AmericanIN729300AV 6/09 National Standard Institute/International Staple, Nail and Tool Association in ANSI/ISANTA

SNT-101-2002.

© 2009 Campbell Hausfeld/Scott Fetzer

For parts, product & service information

visit www.chpower.com