Operating Instructions

 

 

 

 

 

 

 

 

 

SN338K00

Important Safety Instructions

EMPLOYER’S RESPONSIBILITY:

GENERAL

 

(Continued)

• Selecting an appropriate tool

a.

To reduce the risks of

 

 

OPERATOR’S RESPONSIBILITY:

actuation system, taking into

 

 

electric shock, fire, and

 

consideration the work application

 

 

injury to persons, read all

 

The tool operator is responsible for:

 

 

 

for which the tool is used.

 

 

the instructions before

 

• Reading and understanding tool

 

 

 

• Ensuring that this manual is

 

 

using the tool.

 

labels and manual.

b. Be thoroughly familiar with the

available to operators and personnel

 

 

• Selecting an appropriate tool

performing maintenance.

 

 

controls and the proper use of the

actuation system, taking into

• The safe use of the tool.

 

 

equipment. Follow all instructions.

consideration the work application

 

 

Contact your Husky representative if

• Enforcing that the

 

 

 

 

 

for which the tool is used.

 

 

 

 

 

you have any questions.

 

tool is used only when

 

 

 

 

 

 

• The safe use of the tool.

 

 

 

c.

Only persons well acquainted with

the operator and all

 

 

 

• Ensuring that the tool

 

 

 

 

 

 

these rules of safe operation should

 

other personnel in the

 

 

 

 

 

 

 

 

 

 

 

be allowed to use the unit.

 

is used only when

 

work area are wearing ANSI Z87

 

 

 

 

 

 

 

 

Read and

 

the operator and all

 

eye protection equipment, and

 

 

 

 

 

other personnel in the

 

when required, other appropriate

 

 

 

 

understand tool

 

labels and manual. Failure to follow

 

work area are wearing ANSI Z87

protection equipment such as

warnings, dangers, and cautions could

eye protection equipment, and

head, hearing and foot protection

result in DEATH or SERIOUS INJURY.

when required, other appropriate

equipment. Serious eye or

WORK AREA

 

protection equipment such as

permanent hearing loss could result.

 

a. Keep the work area clean and well

head, hearing and foot protection

• Assuring that the tool is kept in safe

equipment. Serious eye or

 

 

lighted. Cluttered benches and dark

working order as described in this

 

 

permanent hearing loss could result.

 

 

areas increase the risks of electric

manual.

 

 

• Assuring that the tool is kept in safe

 

 

shock, fire, and injury to persons.

• Assuring the proper maintenance of

 

 

 

 

 

 

 

 

working order as described in this

b. Do not operate the tool

 

all tools in employer’s possession.

 

manual.

 

 

in explosive atmospheres,

 

• Ensuring that tools which require

 

 

 

 

 

 

 

such as in the presence

 

 

 

repair are not further used before

 

 

 

 

 

 

 

of flammable liquids,

 

 

 

repair. Tags and physical segregation

 

 

 

 

 

 

 

gases, or dust. The tool is

 

 

 

are recommended means of control.

 

 

 

 

 

 

 

able to create sparks resulting in the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ignition of the dust or fumes.

 

 

 

 

 

 

 

c.

Keep bystanders, children, and

 

 

 

 

 

 

 

 

 

visitors away while operating the

 

 

 

 

 

 

 

 

 

tool. Distractions are able to result in

 

 

 

 

 

 

 

 

 

the loss of control of the tool.

 

 

 

 

 

 

 

 

 

 

 

 

Tool Components and Specifications

 

 

 

 

Cap Exhaust

 

 

 

 

 

 

• REQUIRES: 0.3 SCFM with

 

 

 

 

 

 

 

 

Trigger

 

10 fasteners per minute @ 90 psi

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• AIR INLET: 1/4 inch NPT

 

 

 

 

 

 

 

 

 

 

 

• FASTENER SIZE RANGE:

 

 

 

 

 

 

 

 

 

 

 

1/2 inch to 1-1/4 inch

 

 

 

 

 

 

 

 

 

 

 

• MAGAZINE CAPACITY:

 

 

 

 

 

 

 

 

 

 

 

100 Nails per Load, 18 gauge

 

 

 

 

 

 

 

 

 

 

 

• STAPLES: 1/4 inch crown

 

 

 

 

 

 

 

 

 

 

Latch

• WEIGHT: 2 lbs. 13 oz.

 

 

 

 

 

 

 

Warning

Button

Adjustable

 

 

 

 

 

Label

 

 

 

 

 

 

• LENGTH: 9-1/2 inches

Depth Control

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•HEIGHT: 8-3/4 inches

•MAXIMUM PRESSURE: 100 psi

•PRESSURE RANGE:

60 psi – 100 psi

Work Contact

 

Element (WCE)

 

 

 

 

 

 

 

 

 

Magazine

 

 

 

 

 

Fastener Discharge Area

 

 

 

 

 

 

 

 

 

 

 

www.chpower.com

2