VARIABLE SPIN SPEED selector | H | ||
|
|
| |
|
|
|
|
Can be turned in either direction |
|
|
|
|
|
|
|
The spin stage plays a very important role in preparing the |
|
| |
laundry for efficient drying and your model offers maximum |
|
| |
flexibility to suit all your requirements. |
|
| |
The selector can be turned to reduce the maximum spin |
|
| |
speed, right up to eliminating the spin completely (position ). |
|
| |
In programmes for mixed fibres, synthetics and delicates, |
|
| |
the washing machine automatically lowers the spin speed. |
|
| |
|
| ||
In order not to damage fabrics, it is not possible to increase this spin speeds. |
| ||
Note: this model is fitted with an electronic device that
checks the load is balanced correctly. If the load is slightly unbalanced the machine will
If, after several attempts, balance is not restored, a reduced spin speed will be used.
If loads are seriously unbalanced the spin stage will be cancelled. This helps limit vibration, reduce noise output and improve the washing machine’s lifespan.
WASH TEMPERATURE CONTROL KNOB | I |
ROTATES IN BOTH DIRECTIONS
With this device it is possible to reduce, but no increase washing cycle temperature.
The table of programmes indicate the maximum temperature advised for each type of wash.
WARNING: THIS TEMPERATURE MUST NEVER BE EXCEEDED
TIME TO END indicator light | L |
In order to manage your time better, this washing machine features an indicator light system that keeps you constantly informed on the remaining cycle time.
Indicator light START:
Remaining time above 60 minutes.
Indicator light 60:
Remaining time less than 60 minutes.
Indicator light 30:
Remaining time less than 30 minutes.
Indicator light 15:
Remaining time less than 15 minutes.
Indicator light STOP:
End of the programme.
Buttons indicator light | M |
The indicator light around the option buttons will light when specific options are selected.
PROGRAMME selector with "OFF" position | N |
|
Rotates in both directions.
The machine is turned on by selecting a programme via the programme selector. This status will be indicated by the "STOP" indicator light flashing, this light will continue to flash until the machine has started or the machine is returned to the "OFF" position.
Press the "Start/Pause" button to start the selected cycle.
Once a programme is selected the programme selector remains stationary on the selected programme till cycle ends.
Switch off the washing machine by turning the selector to "OFF".
Note:
The programme selector must be returned to the "OFF" position at the end of each cycle or when starting a subsequent wash cycle prior to the next programme being selected and started.
10 | 11 |