The controls
10

Switch on the electricity supply to the cooker at the Cooker Control Unit.

Hob Controls Top
Oven
Control
Timer Main
Oven
Control
Top Oven Neon Main Oven Neon
Grill
Control
Hob Hot Neon
Hob Controls
Left Rear Control
As each control knob is turned clockwise, numbers from 1 - 6 on the control knob
increase. Setting 6 is the highest/hottest and gives 100% power. Setting 1 is the
lowest/coolest and gives about 7% power.
Variable power is obtainable on each of the heating areas by selecting any number
between 1 & 6.
This is to control a dual circuit plate with two elements. By turning the knob
clockwise the whole hotplate is switched on, numbers 1-4 on the control knob, 4 is
the highest setting. With the knob turned anti-clockwise, only the inner part of the
hotplate is switched on, this is also indicated by numbers 1-4 on the control knob,
4 is the highest setting. Variable power for either the whole or the inner part of the
hotplate is obtained by selecting any number between 1 & 4.
The off position is identified by an ‘0’.
The hob hot warning light will operate soon after any of the heating areas are
switched on. It will remain illuminated until the ceramic surface has cooled down.