Installation

WARNING – THIS APPLIANCE MUST BE EARTHED.

Mains Connection

Your cooker should have been checked to ensure that the voltage corresponds with your supply voltage, this is stated on the rating plate, which is situated on the front of the plinth.

The cooker must be connected by a competent person such as one who is a, NICEIC registered contractor to a suitable double-pole control unit with a minimum rating of 32A and a minimum contact clearance of 3mm (applicable to newer properties, older properties where a 30A double pole control unit and a minimum contact clearance of 3mm is acceptable).

The double pole control unit should be fitted adjacent to the cooker, in accordance with IEE regulations. The control unit must be within 2 metres of but not directly above the appliance and should be easily accessible in the event of an emergency.

The power supply cable should conform to B.S.6004 with a conductor size of 6mm2, minimum. Access to the mains terminals is gained by removing the rear access cover. The mains cable must pass through the cable clamp adjacent to the terminal block. Sufficient cable should be used to allow the cooker to be pulled out for servicing.

Ensure that the mains cable is routed away from any brackets affixed to the rear panel and is not trapped to the rear wall when pushing the cooker into position between cabinets.

Levelling

Two rear wheels and two front feet are fitted which can be adjusted up or down to set the height (900mm - 915mm) and level the cooker.

1.The rear wheels can be raised or lowered from the BACK of the cooker by adjusting the levelling screws ‘A’ in the plinth.

2.The front feet can be simply screwed in or out to lower or raise the front of the cooker. CAUTION: Some soft floor coverings may get damaged if the cooker is not moved carefully. NOTE: Ensure oven shelves are level by using a spirit level on the rod shelves.

VIEWED FROM REAR

Siting the Cooker

The cooker is designed to fit between kitchen cabinets spaced 600mm apart. The space either side need only be sufficient to allow withdrawal of the cooker for servicing. It can be used with cabinets one side or both as well as in an angled corner setting. It can also be used freestanding. Adjacent side walls which project above hob level, must not be nearer to the cooker than 150mm and should be protected by heat resistant material. Any overhanging surface or cooker hood should not be nearer than 650mm.

Note: This appliance must NOT be fitted on a platform.

Moving the Cooker

Before moving your cooker, switch off at the cooker control unit, ensure that it is cool.

Open the grill door sufficiently to allow a comfortable grip on the underside front edge of the oven roof, avoiding any grill elements.

Radio Interference

This appliance conforms to EN 55014 regarding suppression of radio and television interference.

Note: Take care in moving the cooker as it is heavy. Take care to ensure that any floor covering is not damaged.

20152, 20176E, 20158, 20155, 20170E specifications

Cannon has long been synonymous with quality and innovation in the world of photography, and its latest offerings, the Cannon 20175E, 20170E, 20155, 20158, and 20176E, are no exception. These models cater to a range of photography needs, enabling enthusiasts and professionals alike to capture stunning images with ease.

The Cannon 20175E and 20176E are particularly noteworthy for their advanced autofocus systems. Both models feature Canon's Dual Pixel CMOS AF technology, which provides fast and accurate focusing capabilities, ideal for action shots and low-light conditions. With up to 4,779 AF points, users can expect precision in capturing fleeting moments.

In addition, the 20175E and 20170E are equipped with a 24.1-megapixel APS-C sensor that delivers high-resolution images with excellent detail and color reproduction. These models support 4K video capture, allowing photographers to create professional-grade footage alongside stunning stills. The image processing capabilities have been significantly upgraded, providing better low-light performance and improved dynamic range.

For those focused on portability without sacrificing performance, the Cannon 20155 and 20158 models shine. Designed with compactness in mind, these models still pack powerful features such as an intuitive touchscreen interface, built-in Wi-Fi, and Bluetooth for seamless connectivity. This means transferring images and remote shooting capabilities are just a touch away, ideal for photographers on the go.

All five models are built with robust durability, ensuring they can withstand various shooting environments. They also offer customizable controls, allowing users to tailor settings to their specific shooting preferences. The ergonomics of the cameras have been meticulously designed, providing comfort during prolonged use and enabling a more engaging shooting experience.

The battery life across the range is impressive, facilitating extended shooting sessions without the constant need for recharging. Additionally, with in-camera image stabilization featured in select models, photographers can achieve crisp, clear shots even in less than ideal conditions.

In conclusion, the Cannon 20175E, 20170E, 20155, 20158, and 20176E stand out for their combination of cutting-edge technology, user-friendly design, and high-quality imaging capabilities. Whether you are a seasoned pro or a budding enthusiast, these cameras offer the tools needed to elevate your photography to new heights, making them worthy contenders in an ever-competitive market.

Cannon 20152, 20170E, 20176E, 20175E, 20158, 20155 manual Installation

Models: 20152 20176E 20158 20155 20170E 20175E