Setting Up a Computer as a File Server
3-44
3
Using a TCP/IP Network
FTP Server Settings
Windows 2000/XP/Server 2003

This section describes the procedures for using the default home directory under

[Default FTP Site]. To use other settings, enter the FTP site and home directory by

referring to the IIS documentation.

It is recommended that the FTP server be configured by the network administrator.

The procedure below uses screens of Windows 2000 as an example.

IMPORTANT
The use of Windows 2000 Server/XP Professional/Server 2003 as an FTP server
requires the installation of IIS. If IIS is not installed in the computer you are using, you will
need to install the version of IIS for the operating system you are using before entering
these settings. (See "System Requirements" in "Sending Data," on p. 1-6.) For
installation procedures, see the manuals provided with your operating system.
User authentication for access to FTP servers is performed using the local account
database of Windows 2000 Server/XP Professional/Server 2003 used as the FTP server.
Therefore, it is not possible to use the account of a domain user registered in Windows
2000 Server/XP Professional/Server 2003 to send data directly from the machine to FTP
servers in other domains.
1

Log on to Windows as a member of the group with access

rights to the directory to be designated as the FTP site

directory start IIS.

Depending on your environment, the access rights settings for a drive or
directory may differ. For details, see the Windows manual.
2

In the [Default FTP Site Properties] dialog box, on the

[Security Accounts] sheet, deselect the option which allows

only anonymous connection.