Cannon 500D Direct Printing with Dpof, Preparing to print, Set the Paper settings. p.166, 176

W Direct Printing with DPOF

With a PictBridge printer, you can easily print images with DPOF.

1 Preparing to print.

See page 164. Follow the “Connecting the Camera to a Printer” procedure up to step 5.

2 Under the [3] tab, select [Print order]. 3 Select [Print].

[Print] will be displayed only if the camera is connected to the printer and printing is possible.

4 Set the [Paper settings]. (p.166)

Set the printing effects (p.168) if necessary.

5 Select [OK].

Before printing, be sure to set the paper size. Certain printers cannot imprint the file No.

If [Bordered] is set, the date might be imprinted on the border, depending on the printer. Depending on the printer, the date might look light if it is imprinted on a bright background or on the border.

Under [Adjust levels], [Manual] cannot be selected.

If you stopped the printing and want to resume printing the remaining images, select [Resume]. Note that printing will not resume if you stop the printing and any of the following occurs:

•Before resuming the printing, you changed the print order or deleted print-ordered images.

•When you set the index, you changed the paper setting before resuming the printing.

•When you paused the printing, the card’s remaining capacity was low. If a problem occurs during printing, see page 172.

176