dTransferring Images to a Computer

3Selecting the Images to be Transferred

Under the [3] tab, you can use

[Transfer order] to select the images to be transferred to a computer.

When you select [Transfer order images] on page 179, you can transfer the images set by the transfer order.

Sel.Image

Select and order images one by one. Press the <V> key to include the displayed image in the transfer order. The <X> mark will also appear on the upper left.

After completing the transfer order, press the <M> button to save the transfer order to the card.

All image

If you select [Mark all on card], all the images in the card will be in the transfer order. If you select [Clear all on card], the transfer order will be cleared for all the images in the card.

Do not put into the camera any images whose transfer order was set by a different camera and then try to specify another transfer order. The images in the transfer order might all be overwritten. Also, depending on the image type, the transfer order may not be possible.

For the transfer order, if you select an image captured in the 1+73 mode, it will be counted as one image. During the direct image transfer, both the RAW and JPEG images will be transferred to the computer.

If you want to transfer more than 999 images in one batch, select [All images] on the direct transfer screen (p.178).

180

Page 180
Image 180
Cannon 500D instruction manual 3Selecting the Images to be Transferred, 180