Electronic timer
To set the clock
Manual
Mode
To set the
timer countdown
Cooking |
| End cooking | |||
time setting |
| time setting | |||
Count down |
|
|
|
| Clock |
|
| ||||
time setting |
|
|
|
| time setting |
|
|
|
|
|
|
Selector button
Note: This may be set while the oven is switched off or while it is switched on.
1.Press the 
button several times until the 
icon and the first two numerical digits on the display start to flash.
2.Use the “+” and
3.Press the 
button again so that the other two numerical digits on the display begin to flash.
4.Use the “+” and
5.Press the 
button again to confirm.
Note: If none of the buttons are pressed, the settings will be confirmed automatically after 10 seconds have passed.
The programmer after the Power up and the Clock time setting will be in ‘Manual Mode’ and shall be
possible to engage the other programmer functions using the 
selector.
The oven will be driven directly by the user by means of the knobs present on the control panel.
Note: This function does not interrupt cooking and does not affect the oven; it is simply used to activate the buzzer when the set amount of time has elapsed.
1.Press the 
button several times until the 
icon and the first two numerical digits on the display start to flash.
2.Follow steps 2 to 5 “to set the clock” as detailed above.
The countdown will then be displayed; at the end of this period of time the buzzer will sound (this may be stopped by pressing any of the buttons, or it will stop of its own accord after one minute).
Programming the Note: A cooking mode must be selected before programming can take place.
duration cooking | button several times until the | icon and the first digit on the display flash. |
1. Press the |
2. Follow steps 2 to 5 “to set the clock” as detailed above.
•For example: it is 9:00 a.m. and a time of 1 hour and 15 minutes is programmed. The programme will stop automatically at 10:15 a.m.
Programming delayed cooking
Note: A cooking duration must be selected before delayed programming can take place.
1.Follow istruction “programming the duration cooking” as detailed above.
2.Then press the 
button until the
icon and the two digits on the display flash.
3.Follow steps 2 to 5 “to set the clock” as detailed above.
•For example: it is 9:00 a.m. and a time of 1 hour and 15 minutes is programmed and the end time is set to 12:30. The programme will start automatically at 11:15 a.m.
Programming has been set when the 
and 
icons are illuminated. The TIME display shows the cooking end time and the cooking duration alternately.
To cancel a | Press button |
previous setting |
|
26
