Cannon IWD manual Wash cycles, Table of wash cycles

Wash cycles

	Table of wash cycles
GB
	cycles	Description of the wash cycle
	Wash
		Daily

1White Cotton: extremely soiled whites.

2Cotton Standard (1): heavily soiled whites and resistant colours.

3Cotton Standard (2-3): lightly soiled whites and delicate colours.

4Synthetics: heavily soiled resistant colours.

4Synthetics (4): lightly soiled resistant colours.

5Mix Colored (5): lightly soiled whites and delicate colours. 20° Zone

6Cotton Standard

7Mix Light

820’ Refresh Special

9Outwear

10 Wool: for wool, cashmere, etc.

11 Jeans

Sport

12 Sport Intensive

13 Sport Light

14 Special Shoes

Partial wash cycles

Rinse

Spin + Drain

Max.	Max.	Detergents		Max. (kg)load	Residual dampness %	Energy consum- kWhption	waterTotallt	Cycle duration
temp.	speed
(°C)	(rpm)	Wash	Fabric
			softener
90°				7				160’
	1200				53	2,16	72
60°	1200			7	53	1,23	58	195’
40°	1200			7	53	0,99	82	190’
50°	800			3	-	-	-	105’
40°	800			3	44	0,57	46	95’
40°	1200			7	53	0,66	54	90’
20°				7				170’
	1200				-	-	-
20°	800			7	-	-	-	120’
20°	800			1,5	-	-	-	20’
30°				2				60’
	400		-		-	-	-
40°	800			1,5	-	-	-	70’
40°	800			3,5	-	-	-	70’
30°				2,5				85’
	600				-	-	-
30°	600			2,5	-	-	-	60’
30°	600			Max. 2	-	-	-	60’
				pairs
-				7				36’
	1200	-			-	-	-
-	1200	-	-	7	-	-	-	16’

The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inser- ted, load balancing and any wash options selected.

For all Test Institutes:

1) Test wash cycle in compliance with directive 1061/2010: set wash cycle 2 with a temperature of 60°C.

This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at 60°C. The actual washing temperature may differ from the indicated value.

2) Test wash cycle in compliance with directive 1061/2010: set wash cycle 3 with a temperature of 40°C.

This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at 40°C. The actual washing temperature may differ from the indicated value.

3)Long wash cycle for cottons: set wash cycle 3 with a temperature of 40°C.

4)Synthetic program along: set wash cycle 4 with a temperature of 40°C.

5)Short wash cycle for cottons: set wash cycle 5 with a temperature of 40°C.

8