Manuals / Brands / Photography / Digital Camera / Cannon / Photography / Digital Camera

Cannon S80 Battery Handling, Battery Status Indications, Battery Handling Precaution

1 163

Download 163 pages, 8.71 Mb

Appendix

Battery Handling

Battery Status Indications

The following icons or messages indicate the battery status on the LCD monitor.

Battery charge is low. Recharge it as soon as possible if it will be used for an extended period.

Change the battery pack Battery charge is insufficient to operate the camera. Replace the battery immediately.

Battery Performance (p. 139)

Battery Handling Precaution

This is a rechargeable lithium ion battery pack so there is no need to completely use or discharge it before recharging. It can be recharged at any time.

It takes approximately 90 minutes to bring a fully discharged battery pack to full charge (based on Canon's testing standard). Charging it within a temperature range of 5 - 40 °C (41 - 104 °F) is recommended. Charge times may vary according to the ambient temperature and the battery's charge state.

The use of the separately sold AC Adapter Kit ACK-DC20 is recommended to power the camera during long usage sessions (p. 128).

zKeep the battery terminals clean at all times.

Dirty terminals may cause poor contact between the battery and camera. Polish the terminals with a soft cotton swab before charging or using the battery.

zDo not shake or place the battery charger upside down once the camera battery is in it, as this may cause the battery to fall, damaging it.

zAlthough the battery pack's maximum operating range is 0 to 40 °C (32 to 104 °F), the optimal range is 10 to 30 °C (50 to 86 °F). At cold temperatures, such as those experienced when skiing, performance will temporarily decline, reducing the usable time before recharging. Under these conditions, revive the battery by warming it in a pocket immediately before use. However, ensure that there are no metallic items in the pocket that could cause a short circuit, such as a key ring, etc.

125

11

Appendix

Contents

CAMERA DIGITAL Guide User Camera Advanced About This Guide Contents Page Page Please Read Test Shots Warning Against Copyright Infringement Warranty Limitations Safety Precautions About the Memory Card Warnings Page Caution about magnetic fields Cautions Preventing Malfunctions „Avoid Strong Magnetic Fields „Avoid Condensation Related Problems „If Condensation Forms Inside the Camera „Extended Storage Components Guide Attaching the Wrist Strap Basic Operations Mode Dial Using the Multi Control Dial Using the Viewfinder Using the LCD Monitor LCD Monitor Brightness Changing the brightness of the LCD monitor Display Contents Shooting Information (Shooting Mode) Playback Information- Mode Playback Information-Detailed(Playback Mode) Histogram Function 2 Press the MENU button Changing the Review Duration Power Saving Function Auto Power Down Display Off (Shooting Mode Only) When the Auto Power Down Function Activates When the Display Off Function Activates 1Select [Power Saving] in the [(Set up)] menu and press the FUNC./SET button Formatting a Memory Card 2 Use the or button to select [OK], then press the FUNC./SET button Setting the World Clock 2 With the or button, select (Home), and then press the FUNC./ SET button 4 Use the or button to select (World), press the FUNC./SET button, and then select a destination time zone as same as step Switching to the Destination Time Zone 2 Use the or button to select (World), and then press the MENU button Menu List Rec. Menu Play Menu Set up Menu Page My Camera Menu Resetting Settings to Their Default Values Changing Resolution/Compression Settings Setting the Red-eyeReduction Function Setting the Slow Synchro Using the Self-timer 2 Check that , or is displayed and shoot the image 1 In the [ (Rec.)] menu, select [Self-timer] 2 Use the or button to select and press the FUNC SET button 3 Select the timer delay and number of shots 4 Press the FUNC./SET button Using the Digital Zoom Continuous Shooting Shooting a Movie 2 Turn the multi control dial to select a movie mode 3 Press the shutter button halfway 4 Press the shutter button fully 5 Press the shutter fully again to stop recording Page Page Shooting Panoramic Images (Stitch Assist) Framing a Subject Shooting 2 Select the shooting sequence using the multi control dial 3 Shoot the first frame in the sequence Using the Mode Dial (Creative Zone) Page Program AE Differences between the and Modes Setting the Shutter Speed Shutter Speed Display Setting the Aperture Aperture Setting Display Manually Setting the Shutter Speed and Aperture Shooting in a My Colors Mode 1 Press the FUNC./SET button and select (Positive Changing the Save Method for the Original Image 1 In the [ (Rec.)] menu, select [Save Original] Shooting in the Color Accent Mode 1 Select (Color Accent) from the FUNC. menu and press the MENU button 3 Press the FUNC./SET button Shooting in the Color Swap Mode 1 Select (Switch Color) from the FUNC. menu and press the MENU button Shooting in the Custom Color Mode 1 Select (Custom Color) from the FUNC. menu and press the MENU button 2 Use the button to select [Red], [Green], [Blue] or [Skin Registering Settings to the Shortcut Button Selecting an AF Frame 2 Turn the multi control dial to select the auto selection or 1-pointAF frame 3 Press the button Setting an AF Frame Manually Shooting Problem Subjects for the Autofocus Shooting with the AF Lock Shooting in Manual Focus Mode 1 Press the MF button 2 Turn the multi control dial to adjust the focus of the camera Locking the Exposure Setting (AE Lock) 2 While pressing the shutter button halfway, press the button 3 Recompose the image and shoot Locking the Flash Exposure Setting (FE Lock) Switching between Metering Modes Adjusting the Exposure Adjusting the Tone (White Balance) Setting a Custom White Balance 1 Select * (Auto) from the FUNC. menu and select (Custom) with the or button Changing the Photo Effect 1 Select * (Effect Off) from the FUNC. menu and select the desired photo effect with the or button Changing the ISO Speed Auto Exposure Bracketing (AEB Mode) Focus Bracketing (Focus-BKTMode) Switching between Built-inFlash Adjustment Settings 1 Select [Flash Adjust] from the [ (Rec.)] menu 2 Use the or button to select [Auto] or [Manual] and press the MENU button Setting the Flash Adjustment/Flash Output 1 Select (Flash or Flash Output) from the FUNC. menu 2 Use the or button to adjust the compensation or flash intensity Switching the Timing at which the Flash Fires Shooting Images at Set Intervals (Intervalometer) 5 Press the shutter button Saving Custom Settings Setting the Auto Rotate Function Resetting the File Number Page Create a save destination (folder) Page Magnifying Images Viewing Images in Sets of Nine (Index Playback) The display jumps nine images at a time Jumping to Images Triple Image Scrolling Display Rotating Images in the Display Applying Effects and Playing Back Viewing/Editing Movies Playback and Slow Motion Playback Operations 3 After selecting (Edit), use the or button to select (Cut Beginning) or (Cut End) from the movie editing panel 4 Use the or button to select an image at the position 5 Use the or button to select (Save) and press the FUNC./SET button Attaching Sound Memos to Images Page Automated Playback (Slide Shows) 4 Use the or button to select [Start] and press the 5 When the slide show is over, press the MENU button Select images for the Slide Show 1 Display the slide show menu (p. 99), use the or button and select All Images 3 Select images for the Slide Show 4 Press the MENU button Adjusting the Play Time and Repeat Settings 1 Display the slide show menu (p. 99) 2 Use the or button to select [Set up] and press the FUNC./SET button Configuring Effects 2 Use the or button to select [Effect] Protecting Images Erasing All Images About Printing Setting the DPOF Print Settings Selecting Images for Printing 1 In the [ (Play)] menu, select [Print Order] and press the SET button 2 Use the , , or button to select [Order] and press the FUNC./ SET button 3 Select images for printing Setting the Print Style 1 In the [ (Play)] menu, select [Print Order] and press the FUNC./ SET button 2 Use the , , or button to select [Set up] and press the FUNC./SET button Image Transmission Settings (DPOF Transfer Order) 3 Select images for transferring Viewing Images on a TV Set Customizing the Camera (My Camera Settings) Registering My Camera Settings Press the (Playback) button 2 Press the MENU button and press the button twice 3 Use the or button to select the menu item you wish 5 Use the or button to select [OK] and press the Data that can be Registered as My Camera Settings Page Troubleshooting Lens will not retract Batteries consumed quickly Battery pack does not charge Sounds come from the camera interior Image is blurred or out of focus Subject in recorded image is too dark Subject in recorded image is too bright A bar of light (red, purple) appears on the LCD monitor White dots appear on the image Flash does not fire Image not showing on TV monitor Zoom does not operate The Date/Time menu appears List of Messages Image too large Incompatible JPEG format Corrupted Data RAW Unidentified Image Unselectable image Cannot edit Exx Battery Handling Page Handling the Memory Card Using the AC Adapter Kit (Sold Separately) Car Battery Charger (Sold Separately) 2 Insert the battery pack all the way into the battery charger as shown Using Conversion Lenses (Sold Separately) Warning 3Move in the direction of the arrow and insert it into the viewfinder until it clicks into place 4 Turn the lens in the direction of the arrow to attach it Page Using an Externally Mounted Flash (Sold Separately) High-PowerFlash HF-DC1 Camera Care and Maintenance Specifications Page Page Battery Performance Memory Cards and Estimated Capacities (Recordable Images) „Still images „Movies Image File Sizes (Estimated) SD Memory Card Battery Pack NB-2LH Battery Charger CB-2LW/CB-2LWE Compact Power Adapter CA-PS700 Car Battery Charger CBC-NB2(sold separately) Wide Converter WC-DC10(Sold Separately) Tele-converter TC-DC10(sold separately) Conversion Lens Adapter LA-DC20(sold separately) Photo Tips and Information Exposure Compensation (p. 69) ISO Speed (p. 74) INDEX Page Page Page Page Page Page Page Page Page Page Page Disclaimer Trademark Acknowledgments FCC Notice Canadian Radio Interference Regulations Réglementation canadienne sur les interférences radio Functions Available in Each Shooting Mode