1 In the [ (Rec.)] menu, select [Save Original].

See Selecting Menus and Settings (Basic

Guide: p. 16).

2 Use the or button to select [On] or [Off] and press the MENU button.

zThe display will return to the shooting screen.

zSelect [On] to record the original image too or [Off] to not record it.

zWhen [On], images are numbered sequentially. The original image has the lower number, and the altered image shot with My Colors has the higher number.

zSettings can be made by turning the multi control dial.

[Save Original] is Set to [On]

‹ Only the altered image is shown in the LCD monitor during shooting.

‹The image that appears in the LCD monitor immediately after recording is the altered image (p. 53). If you erase the image at this point, the original image is erased along with the altered image. Exercise adequate caution before deleting a file.

‹Two images are recorded with each shot, so the number of available shots displayed on the LCD monitor is halved.

Shooting in the Color Accent Mode

Colors other than the color specified in the LCD monitor are shot in black and white.

1 Select (Color Accent) from the FUNC. menu and press the MENU button.

z See Shooting in a My Colors Mode (p. 53)

z All colors but the previously specified one display in black and white. z The camera switches to color input mode and the display alternates between the original image and the color accent image (the default

setting is green).

55

3

Dial Mode the Using