(4)Lift the rear wheel off the ground a few inches and, with the derailleur still pulled back, push the wheel forward and down until it comes out of the rear dropouts.
d. Installing a Bolt-On Rear Wheel
(1)Shift the rear derailleur to its outermost position and pull the derailleur body back with your right hand.
(2)Put the chain on to the smallest sprocket. Then, insert the wheel into the frame dropouts and pull it all the way in to the dropouts. The axle nut washers should be on the outside, between the frame and the axle nut.
(3)Tighten the axle nuts as tightly as you can, using a
(4)Push the rear derailleur back into position.
(5)Close the brake; then spin the wheel to make sure that it is centered in the frame and clears the brake shoes.
45
