Detecting a Face and Shooting (Smart Shutter)
76
The shutter will release approximately 2 seconds after the camera detects a
new face (p.93). You can use this when the photographer wants to be in the
image, such as a group photo.
Choose .
zChoose in Steps 1 – 2 on p.62, the n
touch .
zTouch , then touch ^.
Compose the shot and press the
shutter button halfway.
zMake sure a green frame appears on the
face focused on and white frames appear
on other faces.
Press the shutter button fully.
XThe camera will enter shooting stand-by,
and [Look straight at camera to start count
down] will appear on the screen.
XThe lamp will blink and the self-timer
sound will play.
Changing the number of shots
After touching on the screen in Step 1, touch op to change the number of
shots. Touch ^ to complete the setting.
•Shutting both eyes will also be detected as a wink.
•If a wink is not detected, the shutter will release approximately 15
seconds later.
•If there are no people in the shot when the shutter button is pressed fully,
the camera will shoot after a person enters the shot and winks.
Using the Face Self-Timer