Canon 1100HS Checking Connection Information, Disabling Eye-Fi Transfer, Choose Connection info

Using an Eye-Fi Card

• The power saving function does not work while transferring images (p. 50).

•Choosing mode will interrupt the Eye-Fi connection. Choosing another Shooting mode or entering Playback mode will reopen the Eye-

Fi connection, but movies made with mode may be transferred again.

Checking Connection Information

You can check the Eye-Fi card’s access point SSID, or connection status.

Choose [Connection info].

zTouch H, then n to choose the 3 tab, and touch [Eye-Fi Settings].

zTouch [Connection info], then touch [Connection info] again.

XThe connection info screen will appear.

Disabling Eye-Fi Transfer

You can set the card to disable Eye-Fi transfer.

Choose [Disable] in [Eye-Fi trans.].

zTouch H, then n to choose the 3 tab, and touch [Eye-Fi Settings].

zChoose [Eye-Fi trans.], then touch qr to choose [Disable].

What if [Eye-Fi Settings] does not appear?

[Eye-Fi Settings] will not appear when an Eye-Fi card is not inserted in the camera, and when an Eye-Fi card’s write-protect tab is in the locked position. For this reason, settings cannot be changed for Eye-Fi cards equipped with a write- protect tab when the tab is in the locked position.

176