USING THE HOUSING

Whenever changing ports or O-rings, it is highly advisable to perform a simple seal test without the camera inside. Strapping a weight to the housing and lowering the unit to a depth of 30 to 50 feet of water for at least 10 minutes will assure you that the seating of the new port or o-ring is proper. This test, though time consuming and often considered unnecessary, may save your camera equipment from irreparable water damage.The housing is now ready for the dive.

CAUTION: Never jump into the water with the housing. It is best to have the system handed to you after you have made your entry, or have it lowered to you on a rope. Make certain that ropes of other equipment stay clear of the system.

When photographing, be sure to respect the environment. Avoid damaging marine life or manipulating sea creatures to obtain a pleasing photo. The housing is slightly negatively buoyant so that you can lay it down on the bottom, but avoid laying it on living coral or other delicate marine life.

Changing the memory card

Always take care to thoroughly dry the housing before opening it to change memory card. Wipe the housing off with a dry towel. If possible it is suggested that the housing be blown dried by directing an air nozzle around the main o-ring before opening.

Rest the housing on its front with the lens facing down, be carefull to protect the port surface, release the two side latches simultane- ously. Lift the rear part of the housing and place it in a secure location. This minimizes the possibility of any residual water falling into the housing and on to the camera when the housing is opened or damage to the sealing surface.

TRANSPORTING THE AQUATICA Pro Digital housing

Store the AQUATICA Pro Digital housing in a sturdy, shock proof container. When travelling by air, remove or loosen the port. This al- lows for equalization of the air pressure inside the housing to the external air pressure. Failure to do so may cause serious damage to the acrylic ports. Avoid travelling with the camera mounted in the housing. If you must do so, remove the lens as external pressure can damage the camera.

CARE AND MAINTENANCE

Of the housing:

After each and every salt water dive, your housing system should be soaked or rinsed in fresh water. The housing system should soak in fresh water for at least 30 minutes. During this soaking period reach into the water and operate all the controls several times.

Be sure to remove the housing’s main o-ring and clean it after every use. Refer to Maintenance: Of the O-rings. To ensure that the hand grips won’t fuse on to the housing due to the exposure to salt water, it is also a good practice to occasionally remove the hand grips. Clean and lubricate the bolts with a small amount of WD-40.

WARNING: Use WD-40 carefully, sparingly and only on metal to metal surfaces. WD-40 can damage the acrylic on the ports, the optical surfaces on lens as well as the O-rings.

Of the Ports:

Care should be taken with the Dome Port and Macro Port to avoid scratches on the lens surface. The acrylic port is softer than glass so minor exterior scratches are often unavoidable. However, since the indices of refraction for acrylic and water are almost equal the scratches will not seriously impair image quality. Internal scratches(air side) must be avoided as they do not fill in with water and will affect the quality of the image.

Clean the dome using only products recommended for cleaning acrylic and a soft lint free cloth. Dust on the interior surfaces of the port can be removed with a soft camel hair brush or a blower brush. Caution must be taken when using aerosol devices as not to spray the lens material with the liquid propellant as this may seriously affect the optical properties of the port. Use of pressurize air from a dive tank is not recommended, the force of the air stream may easily dislodge a port or O-ring, It is advisable that ports should be removed and serviced after avery dive.

page 11

Page 12
Image 12
Canon 20062 manual Using the Housing, Care and Maintenance, Ports

20062 specifications

The Canon 20062 is a versatile product that reflects Canon's commitment to quality and innovation. As part of the esteemed Canon EOS line, this camera is designed for both amateur photographers and seasoned professionals seeking to capture stunning images with ease.

One of the most notable features of the Canon 20062 is its high-resolution sensor, which offers exceptional image quality and detail. The CMOS sensor works in conjunction with a DIGIC image processor to deliver vibrant colors, impressive dynamic range, and low noise levels, even in challenging lighting conditions. This makes it an ideal choice for shooting everything from landscapes to portraits.

The camera also boasts an advanced autofocus system that enhances its usability for various photography styles. With a generous number of autofocus points, many of which are cross-type, the Canon 20062 ensures quick and accurate focusing. This feature is particularly beneficial when capturing fast-moving subjects, allowing photographers to achieve sharp shots with minimal effort.

Another standout characteristic of the Canon 20062 is its user-friendly interface. The camera is equipped with a clear and intuitive touchscreen display, which makes navigating settings and reviewing images straightforward. Additionally, customizable controls enable users to tailor the camera's functionality to their specific needs, enhancing the overall shooting experience.

For videographers, the Canon 20062 does not disappoint. The camera supports full HD video recording at various frame rates, allowing users to create smooth, high-quality footage. With built-in microphone input and headphone output, it offers the flexibility needed for serious video production.

In terms of connectivity, the Canon 20062 includes built-in Wi-Fi and NFC capabilities, making it easy to transfer images to devices or share them on social media. This seamless connectivity, combined with compatibility with Canon’s mobile app, allows for remote shooting and easy management of photos.

Durability is yet another highlight of the Canon 20062. Built with a rugged body, it features weather-sealing that helps protect against dust and moisture, making it suitable for outdoor adventures.

In summary, the Canon 20062 stands out due to its excellent image quality, advanced autofocus, user-friendly design, and robust connectivity options. These features collectively make it a compelling choice for anyone looking to elevate their photography or videography game.