Canon 200 IS Shooting with Servo AF

85
While the shutter button is pressed halfway, the focus and exposure will
continue to adjust, allowing you to take pictures of moving subjects without
missing a shot.
Choose [Servo AF].
●Press the n button and choose
[Servo AF] on the 4 tab, and use the qr
buttons to choose [On].
Focus.
●Focus and exposure will be maintained
where the blue AF frame appears while
you press the shutter button halfway.
●If a face is not detected when AF Frame is
set to [Face AiAF] (p. 82), the AF frame
will be set to [Fixed frame].
Shooting with Servo AF
•The camera may not be able to focus and set the exposure in some
conditions.
•If a correct exposure cannot be obtained, the shutter speed and aperture
value are shown in orange. Take your finger off the shutter button, then
press it again halfway.
•You cannot shoot with the AF lock in this mode.
•While in Servo AF mode, [AF-Point Zoom] in the 4 tab cannot be set
to [On].
•Not available in Self-Timer (pp.63 , 64, 78, 79).