Names and Functions of Parts
ADocument Cover
Close this to keep documents in place while scanning.
BScanning Glass
CStop Button
Press this button to stop scan procedures in progress.
DStart Button
Press this button to start scanning the document placed on the scanning glass.
EPower Indicator
This lights when the flatbed is turned ON and flashes when scanning is in progress.
FPower Button
Use this to turn the flatbed ON and OFF.
When you press this to turn the flatbed ON, the power indicator lights.
To turn the flatbed OFF, press and hold the button until the power indicator flashes.
The scanning unit starts to move when the indicator starts flashing, and the indicator turns OFF when the moving stops.
CAUTION
Do not disconnect the power cord or lock the lock switch until the scanning unit stops moving.
NOTE
The auto power OFF setting, which automatically turns the flatbed OFF if it is not operated for 4 hours, is enabled under default conditions.
For details on disabling this setting, see “Auto Power OFF Setting” on p. 26.
GLock Switch
Use this to lock the internal scanning unit into place.
HUSB Connector (Type A)
Use this connector to connect the flatbed to a scanner.
IUSB Connector (Type B)
Use this connector to connect the flatbed to a computer.
JPower Connector
Connect the provided AC adapter here.
13