3

Select the scanner you are using (the name of the

6

connected Canon DR-series scanner should be followed by “w/flatbed”), and click [Settings].

The [Configure Device Settings] dialog box appears.

IMPORTANT

If the flatbed and the Canon DR-series scanner are connected properly, “w/flatbed” should appear after the scanner name. If only the scanner name appears, try reinstalling the software included on the setup disc provided with the flatbed.

4 Click [OK] to finish scanner selection.

5 Select [Scan Batch to File] from the [Scan] menu.

7

The [Scan Batch to File] dialog box appears.

Click [Scanner Setting], and configure the scanner settings.

The properties dialog box for the scanner driver appears.

Configure the [Main Scanner/Flatbed] setting.

Select [Flatbed] if the document is placed on the flatbed, and select [Main Scanner] if the document is placed in the Canon DR-series scanner. If you select [Auto], any documents placed in the feeder will be scanned. If there are no documents in the feeder, scanning is performed on the flatbed.

18