If you selected [Auto] for [Main Scanner/Flatbed] in step 2, you can place the document in either the feeder or the flatbed to continue scanning.
11 Repeat steps 9 and 10 until all documents are scanned.
12 Press the stop button on the scanner when all documents have been scanned.
This completes the scan procedure.
NOTE
Depending on the application you are using and whether the flatbed is connected, scanner operations when scanning with the [Feeding Option] set to [Panel-Feeding] may differ as follows.
Place the next document to be scanned.
10
9 Press the start button on the scanner in which the document is placed.
If the document is placed in the Canon DR-series scanner, pressing the start button on the scanner will start the scan procedure.
If the document is placed on the flatbed, pressing the start button on the flatbed will start the scan procedure.
When the document finishes scanning, the scanner waits for the next document to be placed.
Click [OK] to close the scanner settings dialog box.
Click [OK] to close the settings screen.
Set [Feeding Option] to [Panel-Feeding].
5
6
7
8 Place the document in the scanner, and start the scan procedure from the application.
3 Click the [More] button to open the settings dialog box for the Canon
4 Click the [Feeding] tab.
22