18

Recharging the Battery

Recharge Level
0–50%
50–75%
75-90%
90% or higher
Red lamp
Blinks once per second
Blinks twice per second
Blinks three times per
second
Stays on

Connect the power cord.

•Connect the power cord to the charger.
•Connect the power plug to an AC
outlet.
1

Remove the cover.

•If you remove the battery from the
camera, be sure to reattach the cover
to protect against short circuit.
2
<
–
> mark Attach the battery.
•Align the battery’s top edge with the
<

–

> mark on the charger. While
pressing down the battery, slide it in
the direction of the arrow.
•To detach the battery, follow the above
procedure in reverse.
3

Recharge the battery.

sWhen the battery is attached to the
charger, recharging starts
automatically and the red lamp starts
blinking.
sA completely exhausted battery
takes about 90 minutes to almost
fully recharge.
4
* The numbers around red lamp and the
blinking frequency correspond to the table
above.