=Loading and Unloading Film

• The shutter curtains have been manufactured with very high precision. Never touch them with your fingers. When loading film, do not touch or damage the curtains with your fingers or film.

•In hot and humid environments, do not remove the film packaging until you are ready to load the film.

•Infrared film cannot be used with this camera.

If the film is not loaded properly, the <=> icon will blink on the LCD panel and the shutter will not work. Reload the film cartridge properly.

Unloading Film

After the film’s last frame is exposed, the camera rewinds the film automatically.

After the film is rewound, there will be a shutter-release sound. Check that the <=> icon is blinking on the LCD panel, then open the back cover and take out the film cartridge.

¢Midroll Rewind

To rewind the film in midroll, follow the procedure below.

Press the <¢> button.

s Film rewind will begin.

• Make sure the <=> icon is blinking, then take out film cartridge.

If you take out the film cartridge in midroll without rewinding the film and then load a new roll of film and press the shutter button completely, the new film will only rewind into the cartridge. Before loading a new roll of film in this case, close the camera back and press the shutter button.

16