Reference

Feature Availability Table

: Set automatically. : User-selectable/settable.

Mode Dial Mode Y U I O P A S T R E W Q

 

One Shot

AF

AI Servo

AI Focus

 

AF Point

Auto

 

Selection

Manual

Film Advance

Single frame

Continuous

 

 

Self-timer/

 

Remote control

Troubleshooting Guide

If there is a problem, first refer to this Troubleshooting Guide.

•Nothing is displayed on the LCD panel.

The batteries are exhausted. / The batteries have been installed incorrectly. s Replace the batteries with new ones. / Install the batteries correctly. (p.11)

•The picture looks blurred.

The lens focus mode switch is set to <MF>. s Set the lens focus mode switch to <AF>. (p.13)

There was camera shake when the picture was taken.

s Hold the camera steady or use a faster shutter speed. (p.14)

•The shutter does not work.

On the LCD panel, the frame count is not displayed and the <=> icon blinks. s Take out the film and load it correctly. (p.15)

The focus confirmation light <n> in the viewfinder blinks and focus cannot be achieved.

s Select another AF point. (p.29) If focus still cannot be achieved, focus manually. (p.31)

•The <π> icon blinks on the LCD panel.

The battery level is very low.

s Replace the batteries with new ones. (p.11)

A misoperation has occurred.

sPress the shutter button halfway. (p.14) / Remove the batteries and reload it. (p.11)

If the <π> icon does not stop blinking, consult your nearest service center.

49