Canon 3410 , Pull out the paper cassette.

22

-When the paper is loaded in portrait orientation: <

>

•

When you change the orientation of the loaded custom size paper frequently, it is

convenient if you set <

> to <

>. When <

> is set to <

>, you do not need to change the setting for <

> each time you change the paper orientation. However, if

you specify <

>, make sure that the size of the loaded paper matches the paper

size speciﬁed in the printer driver before printing. If they do not match, the printer may

stop printing, displaying the message <

>, or a paper jam may

occur. Be sure to check if the paper size speciﬁed in the printer driver matches the size of

the paper loaded in the paper cassette before using the printer. However, if <

>

is set to <

>, the printer prints without checking the paper size even when the paper

size speciﬁed in the printer driver and the size of the paper loaded in the paper cassette

do not match.

•

When custom size paper is printed from LIPS LX Printer Driver, you can load the paper

either in portrait or landscape orientation. However, when you are printing custom size

paper of its long edges 215.9 mm or less with <

> set to <

>, load the paper in landscape orientation. When you are not printing from LIPS LX

Printer Driver, load the paper in portrait orientation.

NOTE

Load custom size paper in Cassette 2 (Only when the optional paper feeder is installed)

in the same manner as you load custom size paper in Cassette 1.

1

Pull out the paper cassette.

CAUTION

Be sure to take the paper cassette out of the printer before loading paper.

If paper is loaded while the paper cassette is partially pulled out, the paper

cassette may drop or the printer may become damaged resulting in

personal injury.

Cassette 1 Cassette 2

Contents

Main Contents Turning the Printer ON/OFF Turning the Printer ON Turning the Printer OFF Turn the printer OFF using the following procedure. Page Online and Ofine Placing the Printer Online Placing the Printer Ofine menu, place the printer ofine using the following procedure. Paper Requirements Paper Type Plain Paper Heavy Paper Transparency Label Postcard/Reply postcard/4 on 1 postcard Envelope Abbreviations of Paper Sizes Printable Area Plain Paper/Heavy Paper/Transparency/Label Postcard/Reply Postcard/4 on 1 Postcard Envelope Unusable Paper Paper Capacity of Paper Source Paper Capacity of the Output Trays Loading Paper in the Paper Cassette When Loading Standard Size Paper Page Load the paper stack so that the rear edge is aligned with the paper guide. Page Page Set the paper cassette in the printer. When Loading Custom Size Paper Load custom size paper in the paper cassette using the following procedure. Pull out the paper cassette. Load the paper so that the edge of the paper is aligned with the front side of the paper cassette. Page Page Page Page Set the paper cassette in the printer. Loading Paper in the Multi-purpose Tray Loading Paper (Other than Postcards and Envelopes) Open the multi-purpose tray. Page Spread the paper guides a little wider than the actual paper width. Before loading transparencies or labels, fan them in small batches and align the edges. Page Page Loading Postcards and Envelopes Open the multi-purpose tray. Page Page Page Page Align the paper guides with both sides of the stack. Paper Jams Page Page Paper Jam Area Procedure for Clearing Paper Jams Page Page Page Page Page Page Page Page Page Page Page Page Page Page Replacing the Toner Cartridge When < > Appears Replacing the Toner Cartridge Replace the toner cartridge with a new one using the following procedure. WARNING Page If chipped paper or toner accumulates on the transport guide, clean the transport guide. Page Take the new toner cartridge out of the protective bag after taking it out of the package. Page Page Page Page Canceling a Job When canceling the job, press [OK]. Conrming the Printer Features Make sure that the printer is online. Conrm the contents of the Status Print. Service Call Display OFF ON Page Message List