32
Insert a fully charged Battery Pack LP-E4 into the camera.
1Remove the battery compartment
cap.
2Insert the battery.
Insert the battery firmly all the way,
and turn the release handle as shown
by the arrow.
1Flip out the battery release
handle and turn it as shown by
the arrow.
2Pull out the battery.
To prevent shorting, be sure to attach
the protective cover (p.24) to the
battery.
When not using the camera, attach
the battery compartment cap (p.19).

Installing and Removing the Battery

Installing the Battery
Removing the Battery
If the battery’s rubber lining (to repel water) is not clean, use
a moist cotton swab to wipe it clean.
Rubber lining
COPY