52
Before You Start
To save battery power, the camera turns off automatically after a certain
time of non-operation. You can change this auto power-off time. If you
do not want the camera to turn off automatically, set this to [Off]. After
the power turns off, you can turn on the camera again by pressing the
shutter button or other button.
1Select [Auto power off].
Under the [5] tab, select [Auto
power off], then press <0>.
2Set the desired time.
Turn the <5> dial to select the
setting, then press <0>.
Prevents the beeper from sounding when focus is achieved.
1 Select [Beep].
Under the [2] tab, select [Beep], then press <0>.
2 Select [Off].
Turn the <5> dial to select [Off], then press <0>.
This prevents shooting if there is no card in the camera.
1 Select [Release shutter without card].
Under the [2] tab, select [Release shutter without card], then
press <0>.
2 Select [Disable].
Turn the <5> dial to select [Disable], then press <0>.
3 Set the Power-off Time/Auto Power Off
3 Silencing the Beeper
3 Card Reminder
Even if [Off] has been set, the LCD monitor will turn off automatically after
30 min. to save power. (The camera’s power does not turn off.)
COPY