
3 | 4 | □ Turning the power off |
| ||
|
| Be sure to follow the procedure below. | |||
|
| 1. | Press the ON button (A) to turn off the machine. | ||
| C | 2. | Make sure that all the lamps on the Operation Panel | ||
|
| are not lit. |
|
| |
| E |
| 1 | A | 2 |
D
Use the { or } button (C) on the Operation Panel | Make sure that the |
to select the language for the LCD (Liquid Crystal | above screen is |
Display) (D), then press the OK button. | displayed and go to the |
| next step. |
•If an unintended language is displayed on the LCD, press the Back button (E) to return to the Language selection screen.
Operating noise may continue for up to 30 seconds until the machine turns off.
•When removing the power plug, make sure that all the lamps on the Operation Panel are not lit before removing the plug. Removing the power plug while all the lamps on the Operation Panel light up or flash may cause drying and clogging of the Print Head, resulting in poor printing.
If your machine is used as fax
•Removing the power plug deletes all faxes stored in memory. Send or print faxes as necessary before removing the power plug.
3 Turn the Power On |