Connect Now)
Read this section only when setting up a wireless connection by using the WCN (Windows Connect Now) function of Windows 7/Windows Vista.
If not using WCN, the following procedure is not necessary.
Proceed with the setup according to your operating system.
Windows |
| Go to | |
| |||
Vista |
| ||
|
|
| |
Windows 7 |
| Go to | - on |
| |||
| |||
|
| page 38. |
|
| 1 - A | Windows Vista |
|
|
|
| Windows 7 |
| - (P.38) | |
|
| |||
|
|
1 2 3
Wireless Setup Using WCN (Windows
36
•Before setting up by using the WCN, establish wireless communication between the computer and the access point.
•Canon assumes no responsibility for any damage or loss of data stored on your
USB flash drive regardless of the cause even within the warranty period.
•If your USB flash drive cannot be attached to the Direct Print Port of the machine, a commercial extension cord (for USB flash drives) may be required.
•Operation may not be guaranteed depending on your USB flash drive.
•USB flash drives with security enabled may not be used.
• The machine supports
10 Wireless Setup
From the Start menu of the Windows side, click
Network.
The Network folder opens.
Click Add a wireless device on the menu.
The Add a wireless device to the network
screen will be displayed.
Click I want to add a wireless device or computer that is not on the list, using a USB flash drive.