„ Installing the Ink Tanks | Canon 475D specs

Installing the Ink Tanks

•For safety reasons, store ink tanks out of the reach of small children.

•Do not drop or shake ink tanks as this may cause the ink to leak out and stain your clothes and hands.

protective cap

1Take out the black ink tank.

2Hold the ink tank as shown in the diagram and remove the protective cap.

ink port

• Do not touch the ink port.

• Do not attempt to reattach the protective cap once it has been removed.

3Insert the black ink tank into the right- hand slot.

4Press the tab until it clicks into place.

5Use the same procedure to install the color ink tank in the left-hand slot.

6Close the front cover.

Wait until the POWER lamp remains fully lit (about 60 seconds).

6

Image 8

Canon 475D quick start „ Installing the Ink Tanks

Contents

Table of Contents Quick Start Guide Exif Print Introduction PrefaceShipping Materials Setting Up Preparing the Printer Connecting the Printer to the Computer Installing the Print Head „ Installing the Print HeadOpen the output tray Open the front cover Raise the lock lever Remove the protective cap from the print head „ Installing the Ink Tanks Loading Paper „ Loading A4 Letter Size Plain Paper Installing the Printer Driver „ Installing the Printer Driver WindowsPage Click OK Click Exit „ Installing the Printer Driver Macintosh Click Continue Software installation will start Software installation is complete. Restart your computer Aligning the Print Head „ Aligning the Print Head Windows After the pattern is printed, click Yes „ Aligning the Print Head Macintosh Open the BJ Printer Utility dialog boxPrint the pattern Check that paper is loaded in the printer and click OK Click Quit „ Aligning the Print Head Operation Panel Press the Maintenance button „ Printing Basic OperationsPrinting with Windows „ Basic Print Settings Print Quality Open the Page Setup dialog box in your application Specify the page setupSpecify the print settings according to your requirements Printing with Macintosh „ Page Setup Print Mode „ When the Printer Runs out of Ink Install the new ink tank„ If Blurring Occurs or If a Specific Color Does Not Print Open the front cover and remove the empty ink tank „ Reinstalling „ User’s Guide Contents„ How to View the User’s Guide Appendix „ Printer Specifications„ Applications Included in the CD-ROM Package „ Bubble Jet Direct Print Ink Tanks „ BJ Printer Driver Systems Requirements Additional Systems Requirements for Electric Manual Canon INC.2003