Copying Recordings to a Memory Card

To select individual photos

1Touch on the individual photos you want to copy.

A checkmark O will appear on the photos you touch. The total number of selected photos will appear next to the o icon.

Touch a selected photo to remove the checkmark. To remove all checkmarks at once, touch [Remove All] [Yes].

2

After selecting all the desired photos, touch [OK].

127

 

 

 

 

Options

 

 

 

 

 

 

[Select] Select individual photos to copy.

 

 

[All Photos] Copy all the photos.

 

 

 

IMPORTANT

 

 

 

Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so

 

 

may result in permanent data loss.

 

 

 

- Do not open the double memory card slot cover.

 

 

- Do not disconnect the power source or turn off the camcorder.

 

 

- Do not change the camcorder’s operating mode.

 

 

COPY

 

When copying photos onto an Eye-Fi card in memory card slot , photos will be uploaded

 

 

automatically if you are within the range of a configured network. Always verify that Eye-Fi cards

 

 

have been approved in the country/region of use. See also Using an Eye-Fi card (0136).

 

 

NOTES

 

 

 

In the following cases, you will not be able to copy recordings to the memory card:

 

 

- If the double memory card slot is open.

 

 

 

- If the LOCK switch on memory cardis set to prevent writing.

 

- If there is no memory card in memory card slot Y.

Scenes that were transferred back to the camcorder using the supplied PIXELA’s software cannot be copied to the memory card.

If there is not enough space on memory card Y, as many photos as possible will be copied before stopping the operation.