Capturing Video Snapshot Scenes and Photos from a Movie

Capturing Photos

You can capture a single photo or a series of photos. The size of the captured photos will be 1920x1080 and it cannot be changed.

Please read the IMPORTANT section (097) before using an Eye-Fi card.

To select the photo capture settings

1

Open the [Photo Capture from Video] screen.

97

 

[MENU]

8

[Photo Capture from Video]

 

 

2

Touch [ASingle Photo] or [BPhoto Sequence] and then touch [a].

 

To capture the photos

1Play back the scene or story from which you want to capture the photo.

2 Pause the playback at the point you want to capture.

3 Touch [PHOTO].

•To capture a photo sequence, keep touching [PHOTO]. The scene will be played back frame-by- frame and each frame captured as a separate photo.

4 Touch [B] to stop the playback.

IMPORTANT

• When capturing photos on an Eye-Fi card in memory card slot , photos will be uploaded automatically if you are within the range of a configured network. Always verify that Eye-Fi cards have been approved in the country/region of use. See also Using an Eye-Fi card (0136).

NOTES

•The data code of the photos will reflect the date and time of recording of the original scene.

•Photos captured from a scene with a lot of fast movement may be blurred.

•Photos will be recorded on the memory selected for recording photos.

•[BPhoto Sequence]:

-Up to 100 photos can be captured at a time.

-The photo sequence capture will stop when the end of the scene is reached (playback will pause at the beginning of the following scene).

-Photos will be captured at intervals of 1/30 second (1/24 second, if the scene was recorded at a

frame rate of [EPF24] or [ 24P]).