COMPUTER MODE
SELECTING COMPUTER MODE
DIRECT OPERATION
Select COMPUTER mode by pressing the MODE button on the Top Control or the COMPUTER button on the Remote Control Unit.
MODE button
COMPUTER
VIDEO
MENU OPERATION
Press the MENU button and the
Computer 
and press the SELECT button.
CURRENT MODE DISPLAY
When selecting the Computer Mode, the Current Mode display appears. It shows the information of the computer of the mode selected.
Providing the information of the computer detected by the projector.
SELECTING COMPUTER SYSTEM
AUTOMATIC MULTI-SCAN SYSTEM
This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA or SXGA (refer to “COMPATIBLE COMPUTER SPECIFICATION” on page 23). When selecting Computer, this projector automatically tunes to the incoming signal and projects the proper image without any special settings. (Setting of the Computer System may be required when connecting some computers.)
Note : The projector may display one of the following messages.
Go to PC adj. | The projector cannot discriminate or detect the input |
| signal from the computer. Adjust and set the |
| |
| computer system manually. (Refer to page 24.) |
| There is no signal input from the computer. Make |
No signal | |
| sure the connection of the computer and the |
| |
| projector is set correctly. |
| (Refer to TROUBLESHOOTING on page 37.) |
SELECT COMPUTER SYSTEM MANUALLY
To set the Computer system manually, select the mode on the
1 | Press the MENU button and the |
appear. Press the POINT LEFT/RIGHT buttons to select | |
| SYSTEM and press the SELECT button. Another dialog box |
| SYSTEM MENU will appear. |
2 | Press the POINT DOWN button and a |
appear. Move the arrow to the system that you want to set, and |
then press SELECT button.
SYSTEM BOX
Displays the SYSTEM being selected.
The system being selected.
The systems on these dialog boxes can be selected.
Closes SYSTEM
MENU.
22
