Protecting Images
Choosing Images IndividuallyChoose [Select].
zFollowing step 2 on p. 142, touch [Select].
Choose an image.
zChoose an image after dragging left or right to browse. Once you touch the screen, is
displayed.
z To cancel protection, touch the screen again. is no longer displayed.
zRepeat this process to specify other images.
zTouch [OK]. A confirmation message is displayed.
Protect the images.
zTouch [OK].
•Images will not be protected if you switch to Shooting mode or turn
the camera off before finishing the setup process in step 3.
Specifying All Images at OnceChoose [Select All Images].
zFollowing step 2 on p. 142, touch [Select All Images].
Protect the images.
zTouch [Protect].
• To cancel protection for groups of images, choose [Unlock] in step 2.
143