Easy Wireless Flash Shooting

4Select [Built-in flash func. setting].

Select [Built-in flash func. setting], then press <0>.

5

6

7

Select [EasyWireless].

For [Built-in flash], select

[EasyWireless], then press <0>.

Set [Channel].

Set the channel (1-4) to the same one as the slave unit.

Take the picture.

As with normal flash shooting, you can set the camera and take the picture in the same way.

8Exit the wireless flash shooting.

For [Built-in flash func. setting], select [NormalFiring].

Setting [E-TTL II meter.] to [Evaluative] is recommended.

With [EasyWireless], even if you disable the built-in flash from firing, it will still fire to control the slave unit. Depending on shooting conditions, the flash fired to control the slave unit may appear in the picture.

Firing a test flash is not possible with the slave unit.

192