Custom Wireless Flash Shooting
[1(A:B)] Multiple slave units in multiple groups
| Divide the slave units into groups A and |
| B, and change the flash ratio to obtain |
| the desired lighting effect. |
| Refer to your Speedlite’s instruction |
A | B manual to set one slave unit’s slave ID |
| to A (Group A) and the other slave unit’s |
| ID to B (Group B) and position them as |
| shown in the illustration. |
1Select [Wireless func.].
Follow step 2 on page 194 to select [0], then press <0>.
2Set [Firing group] to [1(A:B)].
3Set the desired flash ratio and take the picture.
Select [A:B fire ratio] and set the flash ratio.
If [Firing group] is set to [1(A:B)], group C will not fire.
The 8:1 to 1:1 to 1:8 flash ratio is equivalent to 3:1 to 1:1 to 1:3 stops (1/2- stop increments).
196