Adding Effects and Shooting (Creative Filters)
Specify the color.
zPosition the center frame so it is filled with
the color you want and press the qbutton. XThe specified color will be recorded.
| Specify the range of colors. | |
| z Press the op buttons or turn the 7 dial | |
Recorded color | to change the range of colors to be | |
retained. | ||
|
zChoose a negative value to limit the range of colors. Choose a positive value to extend the range of colors to similar colors.
zPress the m button to complete the setting and restore the shooting screen.
• Using the flash may cause unexpected results in this mode.
• Depending on shooting conditions, the image may become coarse, or the colors may not come out as expected.
Shooting with Color Swap
You can swap one color in an image for another when recording it. You can only swap one color.
Choose Y.
zFollow Steps 1 – 2 on p. 63 to choose Y.
Press the p button.
XThe unchanged image and the Color Swap image will alternately display.
XThe default setting is to change green to gray.
69