Changing Shooting Function Settings
• Gray items can also be set, however, they may not appear depending on the Shooting mode.
•Grid lines will not be recorded on the image.
Changing the
zChoose [IS Settings], then press the m button.
zPress the op buttons or turn the 7 dial to choose [IS Mode], then press the qr buttons to choose an option.
| Automatically sets the optimal | |
Continuous | image stabilization for the scene | |
| (Intelligent IS) (p. 207). | |
Shoot Only* | Image stabilization is only active | |
at the moment of shooting. | ||
| ||
Off | Turns off image stabilization. | |
|
|
*Setting changes to [Continuous] when shooting movies.
If camera shake is too strong, attach the camera to a tripod. You should also set the IS Mode to [Off] when the camera is attached to a tripod.
Turning Off the Powered IS Function
Powered IS reduces subtle camera shake when shooting movies at max. telephoto. However, when shooting while walking, or during long panning shots, you should set Powered IS to [Off], as it may cause unexpected results in these situations.
zChoose [IS Settings], then press the m button.
zPress the op buttons or turn the 7 dial to choose [Powered IS], then press the qr buttons to choose [Off].
[Powered IS] settings will be disabled if [IS Mode] is set to [Off].
186